Intelligent uniform Constant Temperature and Humidit Climatic Test Chamber
Environmental Temperature and Humidity Test Chamber have temperature change rates from 1 to 3°C per minute in average and controlled humidity from 10% to 95%. There are 6 sizes with interior volumes of 100 to 1000 Liters or we also provide tailor-made chambers of size. On the advance model for Cycling Chambers have temperature change rates from 3 to 15 °C, controlled humidity from 10 to 95%.
Applications:
- To simulate test environment with different temperature and humidity
- Cyclic test includes climatic conditions: holding test, cooling-off test, heating-up test, moistening test and drying test…
- Cable port with flexible silicone plug for cable routing to provide the condition of test unit under operation
- Uncover test unit weakness in a short-term test with accelerated time effect.
-
-
Standard Features:
REMARK:The table parameters is for the company Standard Model parameters, we support customer customization parameters
Chamber Design Features:
1. High performance and quiet operation (68 dBA)
2. Space-saving designed for flush installation to wall
3. Full thermal break around doorframe
4. One 50mm diameter cable port o left, with flexible silicone plug
5. Accurate wet/dry-bulb humidity measurement system for easy maintain
Programmable Controller:
1. PLC controller for test chamber
2. Step types include: ramp, soak, jump, auto-start, and end
3. RS-232 interface to connect computer for output
Specification:
| working chamber dimension |
5,10,20,50,100 cubic metre |
| working chamber innage |
2000 x 3000 x 2200MM |
| Exterior dimension |
2500 x 3600 x 2500MM |
|
measurement range
|
Temperature range |
-20ºC,-40ºC,-60ºC,-70ºC~-80ºC(optional) |
| Temperature fluctuations range |
±0.5ºC |
| Temperature conformity |
±5ºC |
| heating rate |
1.2~2ºC/min |
| Cooling Rate |
0.7~1ºC/min international standard(linear temperature change rate as customer required) |
| Note:above indexes are measured in condition of atmospheric pressure and no load |
| structure and material |
Laboratory structure |
The unity consists of laboratory(with a single door made up of laminboard on the left),electric control cabinet(on the right) and refrigerator cabinet(at the rear). |
| outer wall material |
High end colored copper sheet |
| inner wall material |
SUS304 stainless steel,corrosion proof,easy to clean |
| thermal insulation material |
rigid polyurethane foam |
| Ventilation passage |
centrifugal fan;tuyere can debug air volume. |
| door |
Single door;double layer and high low temperature resistant stainless steel sheet and silicon rubber with double seal;inner&outer wrench to avoid being locked inside(consider a double door for comparatively bigger volume) |
| Observation window |
Size:260 x 380mm;electroplating film damp-proof and insulating observation window;11w Philips fluorescent lamp |
| Programmable controller |
Korean Samwontech TIME880 colorful touch screen |
|
Refrigeration and
dehumidification system |
German BITZER Hermetic compressor |
| Ventilation passage system |
Material:SUS304first class mirror panel blow cycle:hot wind positive loop system |
| Heating and humidification system |
Heating:nickel-chrome heating wire
Humidification: nickel-chrome humidification pipe |
| Power supply |
AC 380V 50HZ 6KW |
-
Our service:
During the whole business process, we offer a Consultative Selling services.
1)Customer inquiry process:
Discussing testing requirements and technical details, suggested suitable products to customer to confirm.
Then quote the most suitable price according to customer requirements.
2)Specifications customize process:
Drawing related drawings to confirm with customer for customized requirements. Offer reference photos to show the appearance of the product. Then, confirm the final solution and confirm the final price with the customer.
3)Production and delivery process:
We will produce the machines according to confirmed PO requirements. Offering photos to show the production process.
After finishing production, offer photos to the customer to confirm again with the machine. Then do your own factory calibration or third-party calibration(as per customer requirements). Check and test all the details and then arrange packing.
Delivering the products is confirmed shipping time and informed the customer.
4)Installation and after-sale service:
Defines installing those products in the field and providing after-sales support.
FAQ:
1. Are you a Manufacturer? Do you offer after-sales service? How can I ask for that? And how about the warranty?
Yes, we are the one of professional manufacturers of Environmental Chambers, Leather shoe testing equipment, and Plastic Rubber testing Equipment... in China. Every machine purchased from our factory has 12 month warranty after shipment. Generally, we offer 12 months for FREE maintenance. while considering sea transportation, we can extend 2 months for our customers.
Moreover, If your machine doesn't work, you can send us an e-mail or call us we will try our best to find the problem through our conversation or by video chat if necessary. Once we have confirmed the problem, the solution will be offered within 24 to 48 hours.
2. What about the delivery term?
For our standard machine which means normal machines, If we have stock in the warehouse, is 3-7 working days;
If there is no stock, normally, the delivery time is 15-20 working days after payment is received;
If you are in urgent need, we will make a special arrangement for you.
3. Do you accept customization services? Can I have my logo on the machine?
Yes, of course. We can not only offer standard machines but also customized machines according to your requirements. And we can also put your logo on the machine which means we offer OEM and ODM service.
4. How can I install and use the machine?
Once you have ordered the testing machines from us, we will send you the operation manual or video in English version through Email.
Most of our machine is shipped with a whole part, which means it is already installed, you just need to connect the power cable and start to use it. And if it's necessary, we can also assist you to install your machine on-site.
Audited Supplier 
){kind=link}